Mains Pressure Small Storage Electric Water Heaters

6L, 10L and 15L capacities Pre-set to 60°C.

The mains pressure water heaters provide consistent, reliable hot water at point of use for outlets like basins or sinks. This product is the perfect solution when single fixtures are located far from a central heating space, as it delivers hot water without excess wait time or loss of pressure. The compact design allows for easy installation in small areas, with the unit fitting easily under benches, reducing the waste that can come with excess pipe runs.

Available in 6L, 10L & 15L mains pressure options.

OVERVIEW

A decentralised approach for staged apartment delivery.

Designed for point-of-use installation, Small Storage systems provide reliable hot water for multiple outlets, without the need for larger systems, while allowing compact under-bench installation in tighter spaces.

Models Available

6L, 10L, 15L

Power Supply

230V

Temperature Setting

60°C

Ideal for:

Multi-Residential Apartment Buildings Aged Care Residential Care Commercial Buildings Offices Factories & Industrial Education Facilities Healthcare Facilities

SPECIFICATIONS

Technical data.

Item

6L Pressure

10L Pressure

15L Pressure

Part No.

2850003

2850004

2850005

Type

Pressure Storage

Capacity, L

Voltage, Vac

220 – 240, 1-phase

Rated Power, W

2000

Rated Current, A

8.1 – 9.2

Temperature Setting, °C

75°

Heating Time, mins. (∆T = 30°C)

6.6

10.6

14.9

Maximum Permissible Pressure, kPa

850

Minimum Inlet Water Pressure, kPa

110

Maximum Water Inlet Pressure, kPa

550

Dimensions, mm

290W x 290H x 290D

360W x 350H x 300D

360W x 350H x 320D

Weight, kg

6.2

7.4

8.4

IP Rating

IPX4

Water Connections

Cold = G1/2” Male | Hot = G1/2” Male

WaterMark Approval

WM 40394 (AS 3498)

DOWNLOADS

Everything you need to specify.

Design support material is available to assist apartment project teams during early-stage planning and detailed documentation.

PDF Specification Sheet 51 KB – PDF PDF Instruction Manual 405 KB – PDF

APPROVALS & CERTIFICATIONS

WaterMark Certified WM 40394 (AS 3498)

FEATURES

Point of use installation – no need to install a larger tank in a roof cavity etc
Space-saving under bench installation
Main pressure tanks can service multiple outlets
Suitable for use with all taps (no specialty taps required)
Enamelled steel tank
Includes PTR valve
Temperature set at 75°C
Operates on 230V, plugs into power point
Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements

FAQS

Frequently asked questions

Why use a decentralised approach in apartments?

It can reduce long distribution runs, support staged delivery, and simplify maintenance by localising hot water generation.

Does this reduce plant room requirements?

In many cases, yes. Localised generation can reduce or eliminate the need for large dedicated hot water plant spaces.

Is this suitable for high-rise construction?

Yes. It is particularly relevant where staged handover and service coordination are key project drivers.

Can it support build-to-rent projects?

Yes. The solution aligns well with repeatable apartment layouts and straightforward maintenance strategies.

Is project-specific design advice available?

Yes. Technical support is available during concept, documentation, and procurement stages.

Other products in the Fala range.

On This Page