An instantaneous (tankless) water heater heats water on demand as it flows through the unit, eliminating the need for a storage tank and reducing energy waste.
Yes. The 8.5kW model is designed to supply multiple outlets, such as kitchens, basins, and bathrooms, depending on demand and installation setup.
The unit delivers water between 30°C and 48°C, with a maximum temperature below 50°C in accordance with AS3498.
No. Because the unit limits outlet temperature to below 50°C, a tempering valve is not required (AS3498 compliant).
The heater uses electronic controls to automatically adjust power based on flow rate and incoming water temperature, maintaining a consistent outlet temperature.
The unit activates at a minimum flow rate of 2L/min. Below this, the heater will not operate.
Yes. Changes in inlet pressure and temperature can impact output, but the unit automatically compensates to maintain stable performance where possible.
This unit operates on 220–240V single phase power and must be hardwired by a licensed electrician.
The unit must be installed indoors, in a frost-free environment, mounted vertically on a wall close to the outlet for best performance.
No. As an electric instantaneous system, it does not require flues, ventilation, or gas connections.
No. The unit is not designed to provide heated potable (drinking) water.
Minimal maintenance is required. Regular inspection is recommended, and descaling may be needed in areas with hard water to prevent performance issues.
On This Page
OVERVIEW
SPECIFICATIONS
DOWNLOADS
APPROVALS & CERTIFICATIONS
FEATURES
FAQS
An instantaneous (tankless) water heater heats water on demand as it flows through the unit, eliminating the need for a storage tank and reducing energy waste.
Yes. The 8.5kW model is designed to supply multiple outlets, such as kitchens, basins, and bathrooms, depending on demand and installation setup.
The unit delivers water between 30°C and 48°C, with a maximum temperature below 50°C in accordance with AS3498.
No. Because the unit limits outlet temperature to below 50°C, a tempering valve is not required (AS3498 compliant).
The heater uses electronic controls to automatically adjust power based on flow rate and incoming water temperature, maintaining a consistent outlet temperature.
The unit activates at a minimum flow rate of 2L/min. Below this, the heater will not operate.
Yes. Changes in inlet pressure and temperature can impact output, but the unit automatically compensates to maintain stable performance where possible.
This unit operates on 220–240V single phase power and must be hardwired by a licensed electrician.
The unit must be installed indoors, in a frost-free environment, mounted vertically on a wall close to the outlet for best performance.
No. As an electric instantaneous system, it does not require flues, ventilation, or gas connections.
No. The unit is not designed to provide heated potable (drinking) water.
Minimal maintenance is required. Regular inspection is recommended, and descaling may be needed in areas with hard water to prevent performance issues.
RELATED PRODUCTS
